Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
276 [2007/02/19 20:40]
n5na created
276 [2007/12/04 03:26] (current)
n5na
Line 1: Line 1:
 ====== Calibrator Model 276 ====== ====== Calibrator Model 276 ======
-{{276.jpg?​150|}}+{{276.jpg?​150|}}{{276rear.jpg?150|}}
  
 ===== Description ===== ===== Description =====
-Crystal calibrator provides markers ​every 25 and 100 kHz.  ​For Century 21 Models [[570]] ​and [[574]].+Provides accurate determination of the operating frequency by inserting highly accurate signals ​every 25 kHz into th receiving antenna circuit. ​ Signals are derived from a 100 kHz crystal oscillator that is factory set to zero beat with WWV.  A divide-by-four flip-flop produces the 25 kHz signal which contains harmonics that extend to more than 30 MHz.  These harmonics are received ​and when tuned to zero beat, determine the accuracy of the Century /21 VFO dial scale. ​ Powered by the Century/21 transceiver. ​ To identify a given 25 kHz signal from an adjacent one, the 4-to-1 divider can be switched off so the nearest ​100 kHz signal can be identified; then the divider switch is turned on again so an accurate signal close to your desired frequency is generated.  ​To identify the calibrator signal on a crowded band, the output is pulsed 3 or 4 times per second. ​ A calibrator on-off switch is provided. ​ Plug-in cable is included. 
 + 
 +===== Specifications ===== 
 + 
 +  ***Crystal Fundamental Frequency:​** 100 kHz 
 +  ***Output Frequency Range:** 25 kHz to above 50 MHz. 
 +  ***Calibration Points:** Every 25 kHz or 100 kHz, selectable. 
 +  ***Power Required:** 9 - 14 VDC taken from Century/21 supply. 
 +  ***Semiconductors:​** 1 transistor, 2 integrated circuits, 1 diode. 
 +  ***Size:** HWD 2" x 4" x 4.5"​. 
 +  ***Finish:​** Gray front panel, black pebble vinyl top and side to match Century/21 transceiver. 
 +  ***Weight:​** 1 lb.

QR Code
QR Code 276 (generated for current page)