This is an old revision of the document!

Jupiter Molex to Power Poles conversion 

Having successfully converted the Molex connector on my Orion to PP, I
decided to proceed and convert my Jupiter as well. In the Jupiter
the power supply board is given slack to get access to the Molex
pins. This involves removal of four screws and some edge connectors.
 
See the Orion page for make up of the Power Poles with brass tubing.

Loosening the board and giving some slack

Plenty of room when the edge connectors are removed.

Here are the Molex pins and two additional 

       components that attaches to them.

Unsoldered and cleaned, ready for the PP

The PP inserted and waiting for soldering

Everything soldered back as before

Finished look with half of a retainer plate.


Trace: • jupiter_molex_to_power_poles_conversion

QR Code
QR Code jupiter_molex_to_power_poles_conversion (generated for current page)