Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
566firmware [2010/04/13 22:12]
n5na
566firmware [2018/10/31 11:58] (current)
n5na [Orion II Firmware History & Download Archive]
Line 1: Line 1:
 ====== Orion II Firmware History & Download Archive ====== ====== Orion II Firmware History & Download Archive ======
-**Note: The firmware downloads below are only the .ruf files, which is the actual file you upload to the Orion. ​ You must use the Update program which comes with the latest firmware download from the [[http://​radio.tentec.com/​downloads/​transceivers/​566|Ten-Tec]] website to install the .ruf file.**+**Note: The firmware downloads below are only the .ruf files, which is the actual file you upload to the Orion. ​ You must use the Update program which comes with the latest firmware download from the Ten-Tec website to install the .ruf file.**
  
 +=====Version 2 =====
  
 ==== Version 2.025 ==== ==== Version 2.025 ====
-**[[/​firmware/​566v2025.zip|Download 2.025]]**+**[[this>./​firmware/​566v2025.zip|Download 2.025]]**
   *Initial Production Release.   *Initial Production Release.
  
Line 24: Line 25:
  
 ==== Version 2.028 ==== ==== Version 2.028 ====
-**[[/​firmware/​566v2028.zip|Download 2.028]]**+**[[this>./​firmware/​566v2028.zip|Download 2.028]]**
   *Corrected update of manual notch under serial port operation.   *Corrected update of manual notch under serial port operation.
   *Corrected update of sidetone volume under serial port operation.   *Corrected update of sidetone volume under serial port operation.
Line 35: Line 36:
  
 ==== Version 2.030 ==== ==== Version 2.030 ====
-**[[/​firmware/​566v2030.zip|Download 2.030]]**+**[[this>./​firmware/​566v2030.zip|Download 2.030]]**
   *Eliminated interaction between FSK monitor tones and the CW sidetone.   *Eliminated interaction between FSK monitor tones and the CW sidetone.
   *Corrected: bug that caused the SSB Monitor level to be high in the headphones after switching from previous CW TX.   *Corrected: bug that caused the SSB Monitor level to be high in the headphones after switching from previous CW TX.
Line 41: Line 42:
  
 ==== Version 2.031 ==== ==== Version 2.031 ====
-**[[/​firmware/​566v2031.zip|Download 2.031]]**+**[[this>./​firmware/​566v2031.zip|Download 2.031]]**
   *Added filter normalization like the V2 code   *Added filter normalization like the V2 code
   *Fixed FSK mode TX interaction with the ST level and MON operation.   *Fixed FSK mode TX interaction with the ST level and MON operation.
Line 48: Line 49:
  
 ==== Version 2.032 ==== ==== Version 2.032 ====
-**[[/​firmware/​566v2032.zip|Download 2.032]]**+**[[this>./​firmware/​566v2032.zip|Download 2.032]]**
   *Fixed sticking TX_OUT bug in non-CW modes that was introduced in 2.031 changes.   *Fixed sticking TX_OUT bug in non-CW modes that was introduced in 2.031 changes.
  
 ==== Version 2.033 ==== ==== Version 2.033 ====
-**[[/​firmware/​566v2033.zip|Download 2.033]]**+**[[this>./​firmware/​566v2033.zip|Download 2.033]]**
   *Increased level of rear panel line output   *Increased level of rear panel line output
   *Fixed TUNE serial port command.   *Fixed TUNE serial port command.
Line 61: Line 62:
  
 ==== Version 2.034 ==== ==== Version 2.034 ====
-**[[/​firmware/​566v2034.zip|Download 2.034]]**+**[[this>./​firmware/​566v2034.zip|Download 2.034]]**
   *Reactivated TGC in FM/AM modes to regain carrier control as in pre 2.033 versions.   *Reactivated TGC in FM/AM modes to regain carrier control as in pre 2.033 versions.
   *Modified SUB receiver tuning to correct filter centering differences between MAIN and SUB in SSB modes.   *Modified SUB receiver tuning to correct filter centering differences between MAIN and SUB in SSB modes.
Line 73: Line 74:
  
 ==== Version 2.037J ==== ==== Version 2.037J ====
-**[[/​firmware/​566v2037j.zip|Download 2.037j]]**+**[[this>./​firmware/​566v2037j.zip|Download 2.037j]]**
   *Modified AGC system. Now has slow attack to eliminate hang-up on spikes.   *Modified AGC system. Now has slow attack to eliminate hang-up on spikes.
   *Lowered Line-Out level because it was clipping in version 2.034.   *Lowered Line-Out level because it was clipping in version 2.034.
Line 116: Line 117:
  
 ==== Version 2.038k ==== ==== Version 2.038k ====
-**[[/​firmware/​566v2038k.zip|Download 2.038k]]**+**[[this>./​firmware/​566v2038k.zip|Download 2.038k]]**
   *Correct bug that caused band register ‘A’ to be overwritten when any band change was made.   *Correct bug that caused band register ‘A’ to be overwritten when any band change was made.
  
  
 ==== Version 2.039d ==== ==== Version 2.039d ====
-**[[/​firmware/​566v2039d.zip|Download 2.039d]]**+**[[this>./​firmware/​566v2039d.zip|Download 2.039d]]**
   *Band register selection now remembered on each band.   *Band register selection now remembered on each band.
   *Modified AGC Slope to give provide maximum gain if FLAT is selected.   *Modified AGC Slope to give provide maximum gain if FLAT is selected.
Line 128: Line 129:
  
 ==== Version 2.041XL Beta ==== ==== Version 2.041XL Beta ====
-**[[/​firmware/​566v2041XL.zip|Download 2.041XL]]**+**[[this>./​firmware/​566v2041XL.zip|Download 2.041XL]]**
   *Enhanced SWEEP function with enlarged display and tuning cursor   *Enhanced SWEEP function with enlarged display and tuning cursor
   *User selectable RF or AF derived AGC   *User selectable RF or AF derived AGC
Line 136: Line 137:
  
 ==== Version 2.041XT Beta ==== ==== Version 2.041XT Beta ====
-**[[/​firmware/​566v2041XT.zip|Download 2.041XT]]**+**[[this>./​firmware/​566v2041XT.zip|Download 2.041XT]]**
   *Corrected bug in DSP SWEEP functions causing display anomalies.   *Corrected bug in DSP SWEEP functions causing display anomalies.
 +
 +==== Version 2.044a ====
 +**[[this>​./​firmware/​566-setup-2.044a.exe_.zip|Download 2.044A]]**
 +  *Modified Noise Reduction control range.
 +  *Fixed SPOT tone overload when changing tone frequency.
 +  *Fixed restoration of bandwidth when recalling USER memory.
 +  *Fixed restoration of bandwidth when recalling memory to VFO-B.
 +
 +===== Version 3 =====
 +
 +==== Version 3.026 ====
 +**[[this>​./​firmware/​566-setup-3.026.exe_.zip|Download 3.026]]**
 +  *Added Support for Model RX366 High Performance Sub Receiver. [Refer to 74467, RX366 Instructions and Operation Manual for detailed information].
 +  *Added Selective Audio Filtering (SAF).
 +  *Added Scalable Diversity Tracking (SDT).
 +    *BW/PBT Tracking
 +    *SAF/NOTCH Tracking
 +    *MODE Tracking
 +    *AGC Tracking
 +  *Ignore several buttons while transmitting.
 +  *Modified SIDETONE adjustment slope/level to make the gain range more usable.
 +  *Adjusted the AGC Threshold setting to more accurately equal the value displayed in the menu.
 +  *Smoother audio switching with QSK, relates to audio transitions on sub-receiver,​ not main or tx.
 +  *Modified SPEECH PROCESSOR to adjust gain range.
 +  *Added Per-Band recall of MIC/PWR to front panel VFOA/B TX buttons, A>B, B>A, VFOA Enter, VFOB Enter.
 +  *Disabled power adjustment when PWR is OFF
 +  *Disabled VOX in FSK mode
 +  *Changed Default for FSK to Mark High
 +  *Corrected various display anomalies. Dots on main screen, version screen, black hash, some text misalignments,​ “mS” vs “ms”, etc.
 +  *Corrected USER Recall of BW value. Was not recalling BW upon USER Recall.
 +  *Corrected various instances of receive audio popping.
 +  *Corrected roofing filter indication for MAIN when B>A forced a change in the MAIN’s roofing filter.
 +  *Corrected bug in sub-rx MOX function, it wasn't muting correctly.
 +  *Resolved issue with reception of Binaural serial command.
 +  *Resolved issue with reception of Tuner Off serial command.
 +  *Fixed SWEEP display issue where a solid vertical bar was shown on the left of the sweep window.
 +  *Corrected Preamp indicator on power up.
 +  *Resolved display issue upon receiving *TT0 serial command
 +
 +==== Version 3.027 ====
 +  *Resolved HW Mic not working
 +
 +==== Version 3.028 ====
 +**[[this>​./​firmware/​566-setup-3.028.exe_.zip|Download 3.028]]**
 +  *Serial port fix resolving some invalid responses to computer queries
 +  *Fixed CW Sidetone Frequency after Transmit on FSK issue
 +  *Fixed PBT display issue when recalling from band register
 +  *Fixed SAF vs. RIT display issue
 +  *Tested/​adjusted sweep display centering
 +
 +==== Version 3.029 ====
 +**[[this>​./​firmware/​566-setup-3.029.exe_.zip|Download 3.029]]**
 +  *Improve post-AGC clean-up filters to improve receive audio
 +
 +==== Version 3.033xa ====
 +**[[this>​./​firmware/​566-setup-3.033xa.exe_.zip|Download 3.033xa]]**
 +  *Added S-Meter Calibration
 +    *The procedure is downloaded with the 3.033xa update, There is a start-menu link. e.g. in Windows, click on Start, All-Programs,​ Ten-Tec, OrionII Firmware Update, then look for the file S-Meter 565 566 Calibration Procedure
 +  *Corrected Sweep alignment in LSB
 +  *Corrected SAF/Notch setting after power up.
 +
 +==== Version 3.033xd ====
 +  *Modified pseudo AGC attack so that it is more resistant to loading upon impulse noise
 +
 +==== Version 3.033xe ====
 +**[[this>​./​firmware/​566-setup-3.033xe.exe_.zip|Download 3.033xe]]**

QR Code
QR Code 566firmware (generated for current page)