Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
253 [2007/02/20 03:44]
n5na created
253 [2018/11/01 02:21] (current)
n5na [Mods & Tips]
Line 1: Line 1:
 ====== Automatic Antenna Coupler Model 253 ====== ====== Automatic Antenna Coupler Model 253 ======
-{{253.jpg?​150|}}+{{253.jpg?​150|}}{{253rear.jpg?​115|}}
  
 ===== Description ===== ===== Description =====
Line 9: Line 9:
   *Built-in memory stores settings for each of the four antenna positions on each of seven band settings, giving a total of 28 memory combinations.   *Built-in memory stores settings for each of the four antenna positions on each of seven band settings, giving a total of 28 memory combinations.
   *Includes dual range power and SWR meter.   *Includes dual range power and SWR meter.
 +
 +===== Reviews =====
 +  *[[http://​www.eham.net/​reviews/​detail/​141|eHam]]
 +
 +
 +===== Mods & Tips =====
 +  *{{ve7tk_253_mod.pdf|Intermittent Keying Loop by VE7TK}}
 +  *[[253banddecoder|Band Decoding Interface]] by Gary Huber - AB9M
 +===== Specifications =====
 +  ***Circuit Type:** Reversible "​L"​ network.
 +  ***RF Power Rating:** 2 KW maximum.
 +  ***Frequency Range:** 1.8 to 30 MHz.
 +  ***Input Impedance:​** 50 ohms, nominal.
 +  ***DC Power Input:** 12 - 14 Volts, 2 amps maximum.
 +  ***Tuning Accuracy:** 1.5:1 VSWR maximum after tuning; 2.5:1 VSWR maximum during tuning.
 +  ***Automatic Tuning Time:** 5 seconds typical, 30 seconds maximum (from home position).
 +  ***Manual Tuning:** Full range manual tuning available via front panel up/down switches
 +  ***Memory Tuning:** Tuner automatically returns to settings last used for each antenna switch position. ​ Separate settings are stored for each band if remote band connector is used.  Retuning (auto or manual) updates memory.
 +  ***Tune Power:** 50 watts minimum, 150 watts maximum. ​ Radiated power at least 6 dB below input during tuning.
 +  ***Antenna Switch:** 4 position. ​ Position 4 configurable for coax, single wire, or balanced line fee.  Internal balun standard.
 +  ***Output Matching Range:** At least 10:1 VSWR, any phase angle, 1.8 to 30 MHz.  1300 ohms maximum parallel equivalent resistance at 1500 watts output (2 KV peak, >26:1 VSWR). ​ 5000 ohms maximum parallel equivalent resistance across balanced line at 1500 watts output (4 KV peak).
 +  ***Minimum Full Power Longwire Length:** Single wire feed: 180/F (MHz) feet at 1500 watts output.
 +  ***Over Voltage:** "​ARCING"​ indicator illuminates when RF voltage exceeds 2 KV.  Tuner is reset to bypass mode if ARCING or OVER indication remains on for more than 1 second. ​ Hot switching protection provided by internal relay interlock system.
 +  ***Size:** HWD 5.5" x 14" x 10.5", overall (138 x 356 x 267 mm).
 +  ***Weight:​** 9 lbs 9 oz., (4.34 Kg).

QR Code
QR Code 253 (generated for current page)