Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
1208 [2008/02/07 17:03]
n5na
1208 [2008/02/07 21:32]
n5na
Line 10: Line 10:
   *Fast, silent RF sensing PIN diode T-R switching   *Fast, silent RF sensing PIN diode T-R switching
  
-===== Specifications ===== 
-  *12 to 15 VDC at 3.0 amps required. 
-  *8 watts typical RF output at 51 MHz. 
-  *Standard 20M transceiver required. 
-  *FM operation transceiver dependent. 
-  *Receive 50-54 MHz. Transmit 50-52 Mhz. 
-  *Input must be 5 watts or less. 
  
 +
 +===== Specifications =====
 +  ***Transmit RF Input:** 5 watts nominal, 14 to 16 MHz, for 50 to 52 MHz output. (May be varied from 0.25 to 10 watts by changing value of R5.)
 +  ***Internal Attenuator:​** up to 8 watts continuous, 10 watts light duty
 +  ***Transmit RF Output:** 8 watts typical, 50 - 52 MHz. (Transmit operation above 52 MHz not recommended.)
 +  ***14 MHz Input/​Output Impedance:​** 50 ohms
 +  ***50 MHz Input/​Output Impedance:​** 50 ohms
 +  ***Local Oscillator:​** 36.000 MHz, crystal-controlled
 +  ***Mixer:** double-balanced diode bridge
 +  ***Receiving Range:** 50 to 54 MHz converted to 14 to 18 MHz
 +  ***Receiving Sensitivity:​** 0.15 uv typical (over-all sensitivity depends on transceiver)
 +  ***14 MHz Feedthrough:​** > -75 dB
 +  ***Image Rejection:​** (~22 MHz)  -60 dB typical
 +  ***HF-6M Antenna Switching:​** manual, rated to 100W (HF)
 +  ***HF Antenna Isolation:​** > -60 dB
 +  ***T-R Switching:​** RF-sensing, solid-state
 +  ***Power Supply Requirement:​** 11 - 14 volts DC, 4 amps
 +  ***DC Current Drain (Receive):​** 170 mA
 +  ***DC Current Requirement (Transmit):​** 3.8 amps
 +  ***Cabinet Dimensions:​** 1-5/​16"​ H x 7-1/4" W x 6-1/8" D
 +  ***Weight:​** 2.5 lbs
  
 ===== Reviews ===== ===== Reviews =====

QR Code
QR Code 1208 (generated for current page)