Differences

This shows you the differences between two versions of the page.

--- 526 [2007/02/11 20:07]
n5na
+++ 526 [2007/02/26 20:12]
n5na
@@ Line 1: / Line 1: @@
 ====== 6N2 Model 526 ======
+{{526_fr_left.jpg?225|}}{{526_back.jpg?225|}}{{526_top.jpg?80|}}
+===== Description =====
+  *Amateur radio's first IF-DSP multi-mode VHF rig
+  *Provides SSB, CW, & FM on both 6 and 2 meters
+  *Extended receive range from 136 - 174 MHz on 2 meters
+  *35 IF-DSP bandwidth filters
+  *100 memories, repeater splits, CTCSS tone
+  *Two SO-239 antenna connectors, one for each band
+  *20 watts output power
+  *Separate low level drive connection from 144 MHz for UHF & microwave transverters
+  *Includes standard hand mic
+  *Original price $695
+===== Accessories =====
+  *Model [[937]] 11 amp Power Supply
+  *Model [[705]] Desk Mic
+===== Reviews =====
+  *[[http://www.arrl.org/members-only/prodrev/pdf/pr0110.pdf|ARRL]](Must be ARRL member & logged in to view.)
+  *[[http://www.eham.net/reviews/detail/1543|eHam.net]]
+===== Related Links =====
+  *[[http://www.tentecwiki.org/webarchive/526|Archived Ten-Tec Web Page]]
+  *[[http://groups.yahoo.com/group/tentec526/|6N2 Yahoo Group]]
+===== Sales Information =====
+{{526_08_01.jpg?100|}}
 ===== Specifications =====
@@ Line 5: / Line 35: @@
 ==== General ====
-MODES: CW, FM, LSB, USB
+**MODES:** CW, FM, LSB, USB
-FREQUENCY RANGE: 50-54 and 144-148 MHz transceive. 136-174 MHz receive.
+**FREQUENCY RANGE:** 50-54 and 144-148 MHz transceive. 136-174 MHz receive.
-DISPLAY: 7 segment LED's for main and secondary DUAL VFO's with SPLIT mode
+**DISPLAY:** 7 segment LED's for main and secondary DUAL VFO's with SPLIT mode
-OFFSET TUNING: +/- 10 kHz receive
+**OFFSET TUNING:** +/- 10 kHz receive
-FM REPEATER OFFSETS: standard for 6m and 2m. Programmable for odd splits. CTCSS: built-in, encode only.
+**FM REPEATER OFFSETS:** standard for 6m and 2m. Programmable for odd splits. CTCSS: built-in, encode only.
-MEMORIES: 100
+**MEMORIES:** 100
-ANTENNA: 50 ohms unbalanced, separate SO-239 output connectors for 6m and 2m
+**ANTENNA:** 50 ohms unbalanced, separate SO-239 output connectors for 6m and 2m
-POWER REQUIRED: 400 mA receive (no signal), 6A transmit @ 12-14 VDC
+**POWER REQUIRED:** 400 mA receive (no signal), 6A transmit @ 12-14 VDC
-CONSTRUCTION: 4 epoxy glass PC boards, molded front panel, aluminum chassis, texture painted steel top and bottom.
+**CONSTRUCTION:** 4 epoxy glass PC boards, molded front panel, aluminum chassis, texture painted steel top and bottom.
-DIMENSIONS: HWD 2.75" x 8.5" x 8.75" (7 x 21.6 x 22.2 cm)
+**DIMENSIONS:** HWD 2.75" x 8.5" x 8.75" (7 x 21.6 x 22.2 cm)
 ==== Transmitter ====
-RF OUTPUT: 1-20 watts, ALC stabilized
+**RF OUTPUT:** 1-20 watts, ALC stabilized
-MICROPHONE INPUT: 200 to 50k ohms, 4 pin, front panel connector accepts microphones with 5 mv (-67 dB) output. Polarized voltage provided at mic jack for electrets.
+**MICROPHONE INPUT:** 200 to 50k ohms, 4 pin, front panel connector accepts microphones with 5 mv (-67 dB) output. Polarized voltage provided at mic jack for electrets.
-T/R SWITCHING: PTT on SSB and FM, QSK on CW.
+**T/R SWITCHING:** PTT on SSB and FM, QSK on CW.
-METERING: forward power
+**METERING:** forward power
-SSB GENERATION: DSP generated
+**SSB GENERATION:** DSP generated
 ==== Receiver ====
-SENSITIVITY: .20 uv typical for 10 dB S+N/N @ 2.4 kHz bandwidth, SSB mode.
+**SENSITIVITY:** .20 uv typical for 10 dB S+N/N @ 2.4 kHz bandwidth, SSB mode.
+**SELECTIVITY:** 35 filters built-in; 200-1000 Hz in 50 Hz steps, 1000-2800 Hz in 100 Hz steps.
-SELECTIVITY: 35 filters built-in; 200-1000 Hz in 50 Hz steps, 1000-2800 Hz in 100 Hz steps.
+**S-METER:** Calibrated to 50 uv at S-9
-S-METER: Calibrated to 50 uv at S-9
+**I-F FREQUENCIES:** 1st I-F 45 MHz, 2nd I-F 450 kHz, 3rd I-F 14.5 kHz
-I-F FREQUENCIES: 1st I-F 45 MHz, 2nd I-F 450 kHz, 3rd I-F 14.5 kHz

Trace:

Differences

Navigation

Search

Toolbox

QR Code