Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
565contrast [2007/05/21 00:43]
127.0.0.1 external edit
565contrast [2011/11/16 16:26] (current)
n1eu
Line 1: Line 1:
 ====== Orion Internal Contrast Control ====== ====== Orion Internal Contrast Control ======
-**From the Orion Reflector April 3, 2006*+        ​Remove the Orion’s covers (4 #2 Phillips and 18 #10 Torx screws ) 
- +        ​Turn on the Orion and confirm that the software CONTRAST in the OTHER menu is set for 50% (This is the factory default value.) 
-The internal contrast needs to be set. This control ​is accessible through ​small hole on the  bottom ​right of the front panel (looking from the front) with the bottom ​ cover removedSet the internal contrast to 50% and adjust this control ​for proper contrast. +        ​Set the Orion on your bench with the bottom side facing up 
- +        ​* ​The hardware CONTRAST adjusting potentiometer ​is located in a hole about an inch back from the front panel on the bottom ​side of the Orion near the MODE buttonAdjust ​for best display.
-73,\\  +
-Paul R. Clinton\\  +
-WD4EBR\\  +
-Service ​ Manager+

QR Code
QR Code 565contrast (generated for current page)