Triton IV Model 540

Solid state transceiver covering 3.5 to 30 Mhz with 200 watts input on all bands.

• Digital Readout Model 244
• One-Sixty Converter Model 240
• Remote VFO Model 242
• Crystal Oscillator Model 241
• Microphone & Stand Model 215P
• AC Power Supply Model 262M
• AC Power Supply Model 252M
• Antenna Tuner Model 247
• Noise Blanker Model 249
• CW Filter Model 245
• Additional Crystals Models 212 and 213
• Mobile Circuit Breaker Model 1140

• eHam

• Ten-Tec Knowledge Base Article

• Add QSK Amp Loop Mod
• Triton Power Connector
• Triton VI Service Note SN-1-540 - Using Accessories with the Triton IV

• Triton IV Sales Brochure (1.2 MB)

• Mosfet RF Amplifier
• Preselector Resonate Control
• Sensitivity: 0.3 uV for 10 dB S+N/N.
• Filtering: 2.6 kHz bandwidth, 1.8 shape factor at 6/60 dB points. Optional CW Filter - 150 Hz wide, two positions, shape factor 7.2 at 6/60 dB.
• AGC Controlled by RF Gain Control
• Meter Automatically Switched to "S" meter when receiving
• Offset Tuning with Defeat Switch and LED Indicator
• Built-in Speaker in Bottom
• External Speaker/Phone Jack
• Less than 2% Audio Distortion
• WWV Reception at 10 and 15 MHz

• 200 Watts Input, SSB and CW, 100% Duty Cycle
• Instant Band Change, No Tune-up Required
• 8-Pole SSB Filter
• Automatic Level Control on Front Panel, LED Indicator Shows Operation in ALC Region
• CW Sidetone Fed into Audio Amplifier when in CW Mode
• Sidetone Adjustable for Tone and Volume
• Automatic CW Offset of 750 Hz
• Press-To-Talk
• Meter Indicates SWR When Transmitting
• High Impedance Microphone Input
• RF Output Impedance 50 - 75 ohms, unbalanced.