Power Supply Model 280

Description

Ideal for powering the CORSAIR Model 560 transceiver on either 115 or 230 VAC, 50-60 Hz. Easy to change for either primary voltage. Regulated output, over-voltage and over-current protected, and can be switched from transceiver or power supply. Same circuitry as the Model 255, but with dual primary and without the build-in speaker.

Specifications

  • Input Voltage: 105 - 125 VAC, 50-60 Hz or 210 - 250 VAC, 50-60 Hz
  • Output: 13.5 VDC +/- 0.5 VDC.
  • Regulation: Better than 1% no load to full load at 117 VAC.
  • Output Current: 18 amperes, full load; 20 amperes, maximum.
  • Ripple: Less than 60 mV peak-to-peak at 18A at 117 VAC.
  • Circuit Breaker: Electronic latching. Factory set at 20A.
  • Over-Voltage Protection: Trips above 16V output.
  • Panel Meter: 0 - 25 amperes.
  • Connections: Attached 3' cable with four pin AMP MATE-N-LOC connector for high current and remote on/off switching. Two phono connectors for low current output.
  • Finish: Dark painted front panel, dark textured top and sides.
  • Size: HWD 5.5" x 7" x 12".
  • Wt: 15 lbs.

QR Code
QR Code 280 (generated for current page)