Handheld 2m Transceiver Model 2591

2 meter handheld transceiver covering 143.500 to 148.995 MHz in steps of 5, 10, 15, 25, or 30 kHz. Includes 10 memories which store operating frequency and transmitter offset. The tenth memory can store oddball splits. Capacity storage allows 30-second battery swap without losing memories. Band scanning and memory scanning included.

• CQ Magazine, 1984, February, Pg 46

• Processor Care (or don't use 12 volts!)
• Basic Operation

• Frequency Range: 143.5 - 148.995 MHz
• Channel Steps: 5, 10, 15, 25, or 30 kHz
• Memories: 10
• Non-standard Split: One
• Emission Type: F3
• Voltage Requirement: 8.4 vdc, 450 maH (NiCad battery pack)
• Case Size: 6.67"H x 2.6"W x 1.6"D
• Weight: 17.5 ounces with battery pack

• R.F. Output Power: Hi - 2.5 watts, Lo - 300 mw
• Modulation: Variable reactance direct modulation
• Frequency Deviation: +/- 5 kHz
• Spurious Radiation: More than 60 dB below carrier
• Microphone: Built-in condenser type
• Current Drain: Hi power - less than 700 ma, Lo power - less than 375 ma
• Memory Drain: Less than 15 ua

• Circuit Type: Double conversion superheterodyne
• Intermediate Frequencies: 10.7 MHz, 455 kHz
• Sensitivity: Better than 0.5 uV for 20 dB quieting; squelch less than 0.4 uV
• Selectivity: More than +/- 7.5 kHz @ -6 dB, less than +/-15 kHz @ -60 dB
• Spurious Response: Better than 50 dB
• Audio Output: 325 mw @ 8 ohms
• Current Drain: Squelched - 25 ma, maximum audio - 175 ma