====== HF/VHF SWR Bridge and Wattmeter Model 1202 ======
{{1202.jpg?150|}}{{1202rear.jpg?150|}}


===== Description =====

HF/VHF SWR Bridge and Wattmeter covering 1.8 - 54 MHz plus 2-Meters.  Separate HF and VHF connectors allows connecting both rigs at the same time.  Includes range switch for 20 or 200 watt scales, HF/VHF selection switch, and sensitivity control.  Housed in a rugged steel enclosure.


===== Specifications =====
  ***Frequency Coverage:** HF: 1.8 to 54 MHz, VHF: 140 to 150 MHz
  ***RF Power Ranges:** 0 - 200 and 0 - 20 watts RF
  ***Wattmeter Accuracy:**  +/- 10% of full scale reading with 50 ohm resistive load
  ***SWR Sensitivity:** better than 2 watts
  ***Impedance:** 50 ohms nominal
  ***Circuitry:** Separate HF and VHF sensing circuits, each with op-amp boosted forward and reverse voltage outputs
  ***Battery Life:** Approximately one week continuous (9V alkaline cell)
  ***External Power:** 9 to 14 volts DC (2.1 mm connector, positive center)
  ***Weight:** 1.75 lbs

===== Mods =====
  *[[1202qrp|QRP Mod]]

===== Related Links =====
  *[[this>./webarchive/1202/|Archived Ten-Tec Web Page]]