jupiter_molex_to_power_poles_conversion

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.


----
**Jupiter Molex to Power Poles conversion**


----

	Having successfully converted the Molex connector on my Orion to PP, I
	decided to proceed and convert my Jupiter as well. In the Jupiter
	the power supply board is given slack to get access to the Molex
	pins. This involves removal of four screws and some edge connectors.
	 


--------

Parts needed: PP, half of retaining plate and 1/16 (1.57mm) brass tube.
	     Thanks to Rick VE7TK for saying that it's O.D.
	     
	     NOTE: Powerwerx.com has the Printed Circuit Board
	           connector instead of having to roll your own.
	           SKU 1377G3


{{:playground:parts_2.jpg?200|}}
----

Close up of parts.


{{:build_1.jpg?200|}}

----

Loosening the board and giving some slack


{{:dsc_5246.jpg?200|}}
----

Plenty of room when the edge connectors are removed.


{{:dsc_5247.jpg?200|}}
----

Here are the Molex pins and two additional
         components that attaches to them.
         
         
{{:dsc_5248.jpg?200|}}
----

Unsoldered and cleaned, ready for the PP


{{:dsc_5249.jpg?200|}}
----


The PP inserted and waiting for soldering


{{:dsc_5250.jpg?200|}}
----


Everything soldered back as before


{{:dsc_5253.jpg?200|}}
----

Finished look with half of a retainer plate.


{{:dsc_5255.jpg?200|}}

DE N2FQ/6 dit dit
----

Trace:

Navigation

Search

Toolbox

QR Code