Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
962 [2019/03/18 14:56]
n5na [Description]
962 [2019/03/18 14:59]
n5na [Description]
Line 9: Line 9:
 The output voltage is available through a 4 x 14 guage 3 foot cable and connector. ​ The cable carries +13.5 Vdc, ground and the "​hot"​ side of the AC primary and mates directly to the POWER jack on the [[560]]/​[[561]]/​[[563]]/​[[564]] and [[585]] transceivers with a [[80572|4 pin AMP MATE-N-LOC]] connector. ​ Two RCA phono jacks on the back of the supply also provide +13.5 Vdc for low current (2 or 3 amps) auxiliary applications. The output voltage is available through a 4 x 14 guage 3 foot cable and connector. ​ The cable carries +13.5 Vdc, ground and the "​hot"​ side of the AC primary and mates directly to the POWER jack on the [[560]]/​[[561]]/​[[563]]/​[[564]] and [[585]] transceivers with a [[80572|4 pin AMP MATE-N-LOC]] connector. ​ Two RCA phono jacks on the back of the supply also provide +13.5 Vdc for low current (2 or 3 amps) auxiliary applications.
  
-{{962_schematic.pdf | 962 Power Supply Schematic}} +{{962_schematic.pdf | 962 Power Supply Schematic ​from WB4JTR}}
  
 +From WB4JTR - In the 962, the regulator pass element was moved to the negative side of the bridge so that the collectors of the power transistors could be grounded -- eliminating the requirement for the mica insulators and protective plastic covers.
  
  

QR Code
QR Code 962 (generated for current page)