Century 22 Model 579

Description

Solid state CW only 50 watt input transceiver. Operates on 80, 40, 30, 20, 15, and bottom 500 kHz of 10m band. Full break-in CW, variable bandpass audio filter and offset tuning.

Reviews

  • ARRL (Must be an ARRL member and logged in to view.)

Manual

Mods

Accessories

  • Power Supply Model 979
  • Crystal Calibrator Model 226
  • Electronic Keyer Board Model 679
  • DC Circuit Breaker Model 1179

Specifications

  • Frequency Coverage: 3.5 to 4.0, 7.0 to 7.5, 10.0 to 10.5, 14.0 to 14.5, 21.0 to 21.5, 28.0 to 28.5 Mhz, plus approximately 40 kHz overshoot at segment edges.
  • Stability: Less than 20 Hz change per degree Fahrenheit from 70 to 110 degrees after 30 minute warm-up.
  • Tuning Rate: Approximately 17 kHz per turn.
  • Power Requirement: 12 to 14 Vdc. At 13.5 Vdc, 500 mA RX, 5 A maximum TX.
  • Frequency Read-out Accuracy: +/- 5 kHz, +/- 2 kHz using option crystal calibrator.
  • Output Impedance: 50 - 75 ohms, unbalanced.
  • Receiver Sensitivity: 0.05 uV for 10 dB S+N/N, typical.
  • Receiver Selectivity: 8 pole variable band-pass audio filter centered at 750 Hz. 200 Hz bandwidth, variable skirt attenuation.
  • Receive Offset: Adjustable +/- 2 kHz, zero at center detent.
  • Audio Output: 1 watt, 8 ohms, less than 2% distortion.
  • Transmitter Power: 50 watts input, nominal 20 watts output with SWR 2:1 or less, ALC limited.
  • Semiconductors: 28 transistors, 24 diodes, 7 IC's.
  • Dimensions: HWD 4" x 10" x 10.5" (10.2 x 25.4 x 26.7 cm) *Weight:** 6 lbs (2.7 kg)

QR Code
QR Code 579 (generated for current page)