This is an old revision of the document!


Century 22 Model 579

Description

Solid state CW only 50 watt input transceiver. Operates on 80, 40, 30, 20, 15, and bottom 500 kHz of 10m band. Full break-in CW, variable bandpass audio filter and offset tuning.

Reviews

  • ARRL (Must be an ARRL member and logged in to view.)

Mods

Accessories

  • Power Supply Model 979
  • Crystal Calibrator Model 226
  • Electronic Keyer Board Model 679
  • DC Circuit Breaker Model 1179

Specifications

  • Frequency Coverage: 3.5 to 4.0, 7.0 to 7.5, 10.0 to 10.5, 14.0 to 14.5, 21.0 to 21.5, 28.0 to 28.5 Mhz, plus approximately 40 kHz overshoot at segment edges.
  • Stability: Less than 20 Hz change per degree Fahrenheit from 70 to 110 degrees after 30 minute warm-up.
  • Tuning Rate: Approximately 17 kHz per turn.
  • Power Requirement: 12 to 14 Vdc. At 13.5 Vdc, 500 mA RX, 5 A maximum TX.
  • Frequency Read-out Accuracy: +/- 5 kHz, +/- 2 kHz using option crystal calibrator.
  • Output Impedance: 50 - 75 ohms, unbalanced.
  • Receiver Sensitivity: 0.05 uV for 10 dB S+N/N, typical.
  • Receiver Selectivity: 8 pole variable band-pass audio filter centered at 750 Hz. 200 Hz bandwidth, variable skirt attenuation.
  • Receive Offset: Adjustable +/- 2 kHz, zero at center detent.
  • Audio Output: 1 watt, 8 ohms, less than 2% distortion.
  • Transmitter Power: 50 watts input, nominal 20 watts output with SWR 2:1 or less, ALC limited.
  • Semiconductors: 28 transistors, 24 diodes, 7 IC's.
  • Dimensions: HWD 4" x 10" x 10.5" (10.2 x 25.4 x 26.7 cm) *Weight:** 6 lbs (2.7 kg)

QR Code
QR Code 579 (generated for current page)