Differences

This shows you the differences between two versions of the page.

Link to this comparison view

565lpf_remove [2015/07/08 14:02]
n1eu created
565lpf_remove [2015/07/08 14:03] (current)
n1eu
Line 9: Line 9:
 4)Unplug J13 and J17, and remove the 3 screws at top the edge of the board. 4)Unplug J13 and J17, and remove the 3 screws at top the edge of the board.
    
-5)Turn the unit over and unplug J8 and J14, and remove the 3 screws at the bottomedge ​of the +5)Turn the unit over and unplug J8 and J14, and remove the 3 screws at the bottom edge of the board.
-    ​board.+
    
-6)Cut the ty-wrap holding the J14 harness and the J17 coax. Also remove thenearby double- +6)Cut the tie-wrap holding the J14 harness and the J17 coax. Also remove thenearby double-sided tape.
-    ​sided tape.+
    
-7)With the rig still upside down, remove the board far enough to unplug J12 andthen +7)With the rig still upside down, remove the board far enough to unplug J12 and then J7, J9, and J11.
-    ​J7, J9, and J11.+
    
 Note:To work on the board (i.e. Replace relays, etc.) the white coaxial cables can be left in place. Note:To work on the board (i.e. Replace relays, etc.) the white coaxial cables can be left in place.

QR Code
QR Code 565lpf_remove (generated for current page)