Transmit RF Input: 5 watts nominal, 14 to 16
MHz, for 50 to 52
MHz output. (May be varied from 0.25 to 10 watts by changing value of R5.)
Internal Attenuator: up to 8 watts continuous, 10 watts light duty
Transmit RF Output: 8 watts typical, 50 - 52
MHz. (Transmit operation above 52
MHz not recommended.)
14 MHz Input/Output Impedance: 50 ohms
50 MHz Input/Output Impedance: 50 ohms
Local Oscillator: 36.000
MHz, crystal-controlled
Mixer: double-balanced diode bridge
Receiving Range: 50 to 54
MHz converted to 14 to 18
MHz
Receiving Sensitivity: 0.15 uv typical (over-all sensitivity depends on transceiver)
14 MHz Feedthrough: > -75 dB
Image Rejection: (~22
MHz) -60 dB typical
HF-6M Antenna Switching: manual, rated to 100W (HF)
HF Antenna Isolation: > -60 dB
T-R Switching: RF-sensing, solid-state
Power Supply Requirement: 11 - 14 volts DC, 4 amps
DC Current Drain (Receive): 170 mA
DC Current Requirement (Transmit): 3.8 amps
Cabinet Dimensions: 1-5/16" H x 7-1/4" W x 6-1/8" D
Weight: 2.5 lbs