Frequency Coverage: 3.5 to 4.0; 7.0 to 7.5; 14.0 to 14.5; 21.0 to 21.5; 28.0 to 28.5; 28.5 to 29.0 MHz. (Crystal not supplied for 28.5 to 29.0 MHz, but available as accessory, Model 273.)
VFO Frequency Stability: less than 20 Hz change per degree Fahrenheit, averaged over a 40o change from 70o to 110o, after 30 minute warmup. Less than 20 Hz change from 105 to 125 VAC line voltage.
Direct Frequency Readout: 5 red LED digits, 0.3" high, accurate to nearest 1 kHz.
Tuning Rate: Approximately 17 kHz per revolution of main tuning knob.
Power Requirements: 105 - 125 VAC, 50-60 Hz. 10 watts receive, 100 watts transmit.
Construction: Rigid aluminum chassis and sub-panels. Aluminum case. Grey front panel, black textured vinyl cover.
Dimensions: HWD 6.125" x 12.5" x 12"
Weight: 15.5 lbs
Receiver
Sensitivity: 1 uV or less for 10 dB S+N/N.
Selectivity: Three position; 0.5, 1.0, and 2.5 kHz.
VFO Frequency: 5.0 to 5.5 MHz. Double Direct Conversion.
Antenna Input: 50 ohms, unbalanced.
Audio Output: 1 watt @ 8 ohms, less than 2% harmonic distortion. Built-in speaker; PHONES jack.
Offset Tuning: Approximately +/- 5 kHz, defeatable with ZERO BEAT switch.
Transmitter
DC Input Power: 70 watts
RF Output Power: 25-30 watts, typical.
Output Impedance: 50 - 75 ohms, unbalanced.
T/R Switching: Full break-in cw with PIN diode switch.