QRP CW Transceiver Kit Model 1315

Description

Three watt QRP CW transceiver kit for 15 meters.

ARRL Review of the 40m Kit (Must be an ARRL member and logged in to view.]]
ARRL Expanded Report of the 40m Kit (Must be an ARRL member and logged in to view.]]
eHam

FREQUENCY COVERAGE: any 50 kHz section of CW sub-band. Selection made during winding of one toroid in VFO circuit.
FREQUENCY CONTROL: varactor tuned oscillator with potentiometer control. Temperature compensated LC components stabilize VFO.
RIT (receive incremental tuning): +/- 1.50 kHz
ANTENNA: 50 ohm unbalanced, SO-239 connector
POWER REQUIREMENT: 12 - 14 VDC, 35 ma on receive with no signal 80 ma on receive for S-9 signal 800 ma on transmit
CONSTRUCTION: black texture painted. Clamshell style steel top and bottom, aluminum chassis. One double-sided printed circuit board measures 3.5" x 5".
BOARD MOUNTED COMPONENTS: 216 including 4 ICs, 19 transistors and 13 diodes.
FRONT PANEL CONTROLS: main tuning, volume, RIT; toggle for power ON/OFF
CONNECTORS: 1/4" stereo phone jack on front for headphones, 3 phono jacks on rear for key, DC input, DC output; SO-239 for antenna
DIMENSIONS: HWD 2.75" x 6" x 6" - 7 x 15.2 x 15.2 cm
WEIGHT: 2.25 lbs - 1.02 kg.

RF OUTPUT: 3 watts typical, no external adjustment
T/R SWITCHING: solid state, full break-in
CW OFFSET and SIDETONE: adjustable 400 - 1000 Hz, sidetone automatically tracks offset frequency. Sinewave sidetone has internal level adjustment.