10m to 2m Transverter Kit Model 1210

Full 10 watts RF output. ALC-controlled 10M input handles power range of 4 to 20 watts. Solid-state T-R switching. Engineered for optimized l0M-2M conversion performance. 1.5"H x 5 "W x 8"D.

• ARRL, 2000, June. (Must be an ARRL member and logged in to view.)
• eHam

• Archived Ten-Tec Web Page

• Frequency Coverage: 144-148 MHz band, typically 144-145.7 MHz, based on 28-29.7 MHz tuning range of most 10 meter transceivers. 116 MHz local oscillator.
• Power requirement: 12-14VDC, 100 mA. receive, 600 mA in transmit with no drive, 2.0A on transmit at 10 watts output.
• Construction: Black texture painted clamshell-type steel top and bottom, aluminum panel chassis and heatsink. One 5.5 "X 3.75" double-sided circuit board.
• Semiconductors: 2 IC's, 13 transistors, 25 diodes. RF final. BLW81.

• RF Output: 10 watts maximum an CW and FM, 10 watts PEP on SSB.
• T/R Switching: Solid state, RF sensing.
• Output Power Adjustment Range: 2 to 10 watts.
• Spurs and Harmonics: Greater than -56 dBc at 10 watts out.
• Standard TX Hang Time: Approximately 1 second.
• Input Drive: Less than 0.5 watts input to key TX mode. 4 watts input for 10 watts output. Input drive level is ALC controlled between 4 and 20 watts. Input SWR less than 1.5:1.

• Noise figure: Less than 7 dB.
• Conversion Gain: Approximately 17 dB.
• Image Rejection: Greater than 60 dB.
• Input Intercept: -6.5 dBm typical.