====== Power Supply Model 280 ======
{{280.jpg?150|}}

===== Description =====
Ideal for powering the CORSAIR Model [[560]] transceiver on either 115 or 230 VAC, 50-60 Hz.  Easy to change for either primary voltage.  Regulated output, over-voltage and over-current protected, and can be switched from transceiver or power supply.  Same circuitry as the Model [[255]], but with dual primary and without the build-in speaker.


===== Specifications =====

  ***Input Voltage:** 105 - 125 VAC, 50-60 Hz or 210 - 250 VAC, 50-60 Hz
  ***Output:** 13.5 VDC +/- 0.5 VDC.
  ***Regulation:** Better than 1% no load to full load at 117 VAC.
  ***Output Current:** 18 amperes, full load; 20 amperes, maximum.
  ***Ripple:** Less than 60 mV peak-to-peak at 18A at 117 VAC.
  ***Circuit Breaker:** Electronic latching.  Factory set at 20A.
  ***Over-Voltage Protection:** Trips above 16V output.
  ***Panel Meter:** 0 - 25 amperes.
  ***Connections:** Attached 3' cable with four pin AMP MATE-N-LOC connector for high current and remote on/off switching. Two phono connectors for low current output.
  ***Finish:** Dark painted front  panel, dark textured top and sides.
  ***Size:** HWD 5.5" x 7" x 12".
  ***Wt:** 15 lbs.