====== 10m to 2m Transverter Kit Model 1210 ======
{{1210.jpg?150|}}

===== Description =====
Full 10 watts RF output. ALC-controlled 10M input handles power range of 4 to 20 watts. Solid-state T-R switching. Engineered for optimized l0M-2M conversion performance. 1.5"H x 5 "W x 8"D.

===== Reviews =====
  *[[http://www.arrl.org/members-only/prodrev/pdf/pr0006.pdf|ARRL]], 2000, June. (Must be an ARRL member and logged in to view.)
  *[[http://www.eham.net/reviews/detail/1831|eHam]]


===== Related Links =====
  *[[this>./webarchive/1210/|Archived Ten-Tec Web Page]]

===== Specifications =====
==== General ====
  ***Frequency Coverage:** 144-148 MHz band, typically 144-145.7 MHz, based on 28-29.7 MHz tuning range of most 10 meter transceivers. 116 MHz local oscillator.
  ***Power requirement:** 12-14VDC, 100 mA. receive, 600 mA in transmit with no drive, 2.0A on transmit at 10 watts output.
  ***Construction:** Black texture painted clamshell-type steel top and bottom, aluminum panel chassis and heatsink. One 5.5 "X 3.75" double-sided circuit board.
  ***Semiconductors:** 2 IC's, 13 transistors, 25 diodes. RF final. BLW81.

==== Transmit ====
  ***RF Output:** 10 watts maximum an CW and FM, 10 watts PEP on SSB.
  ***T/R Switching:** Solid state, RF sensing.
  ***Output Power Adjustment Range:** 2 to 10 watts.
  ***Spurs and Harmonics:** Greater than -56 dBc at 10 watts out.
  ***Standard TX Hang Time:** Approximately 1 second.
  ***Input Drive:** Less than 0.5 watts input to key TX mode. 4 watts input for 10 watts output. Input drive level is ALC controlled between 4 and 20 watts. Input SWR less than 1.5:1.

==== Receive ====
  ***Noise figure:** Less than 7 dB.
  ***Conversion Gain:** Approximately 17 dB.
  ***Image Rejection:** Greater than 60 dB.
  ***Input Intercept:** -6.5 dBm typical.