====== 20m to 6m Transverter Kit Model 1208 ======
{{1208.jpg?150|}}{{1208rear.jpg?170|}}


===== Description =====
  *Use with any transceiver capable of 3-5 watts on 20 meters
  *Extremely simple hookup and operation
  *Low-noise 50-54 MHz receiving output
  *Easy front panel switching between HF and 6M modes
  *Fast, silent RF sensing PIN diode T-R switching



===== Specifications =====
  ***Transmit RF Input:** 5 watts nominal, 14 to 16 MHz, for 50 to 52 MHz output. (May be varied from 0.25 to 10 watts by changing value of R5.)
  ***Internal Attenuator:** up to 8 watts continuous, 10 watts light duty
  ***Transmit RF Output:** 8 watts typical, 50 - 52 MHz. (Transmit operation above 52 MHz not recommended.)
  ***14 MHz Input/Output Impedance:** 50 ohms
  ***50 MHz Input/Output Impedance:** 50 ohms
  ***Local Oscillator:** 36.000 MHz, crystal-controlled
  ***Mixer:** double-balanced diode bridge
  ***Receiving Range:** 50 to 54 MHz converted to 14 to 18 MHz
  ***Receiving Sensitivity:** 0.15 uv typical (over-all sensitivity depends on transceiver)
  ***14 MHz Feedthrough:** > -75 dB
  ***Image Rejection:** (~22 MHz)  -60 dB typical
  ***HF-6M Antenna Switching:** manual, rated to 100W (HF)
  ***HF Antenna Isolation:** > -60 dB
  ***T-R Switching:** RF-sensing, solid-state
  ***Power Supply Requirement:** 11 - 14 volts DC, 4 amps
  ***DC Current Drain (Receive):** 170 mA
  ***DC Current Requirement (Transmit):** 3.8 amps
  ***Cabinet Dimensions:** 1-5/16" H x 7-1/4" W x 6-1/8" D
  ***Weight:** 2.5 lbs

===== Reviews =====
  *[[http://www.arrl.org/members-only/prodrev/pdf/pr9606.pdf|ARRL]], 1996, June. (Must be an ARRL member and logged in to view.)
  *[[http://www.eham.net/reviews/detail/1316|eHam]]
  *[[http://www.eham.net/reviews/detail/173|eHam]]

===== Mods & Tips =====
  *{{ve7tk_1208_mod.pdf|PC Board Error by VE7TK}}

===== Related Links =====
  *[[this>./webarchive/1208/|Archived Ten-Tec Web Page]]